Work on the elaborate optics of ESO’s 39-metre Extremely Large Telescope (ELT) has taken a major step forwards following the successful casting, annealing, ceramization, machining and acid-etching of the substrate for the ELT’s secondary mirror, M2. This massive 3-ton mirror blank has been successfully machined from a slab of the low-expansion ceramic material ZERODUR？ into its near-final form by the German company SCHOTT . The creation of this technological masterpiece was a challenging process, requiring state-of-the-art CNC machines to correctly grind the mirror blank. Now, safely stowed in an extra-large transport box, the blank is being shipped to France for final grinding and polishing by Safran Reosc.
Despite being the ELT’s secondary mirror, M2 still has an impressive diameter of 4.25 meters — larger than the primary mirror of many astronomical telescopes operating today. Following sixteen months of precision manufacturing at SCHOTT, M2 will now receive its final touches — more precisely, fine polishing — at Safran Reosc. The French company will polish the mirror to a precision of 15 nanometres across its entire optical surface, and a final layer of reflective silver and a wafer-thin protective layer of silicon oxide will be applied by ESO at a coating facility at ESO’s Paranal Observatory in Chile.
M2 will be the largest ever secondary mirror employed on a telescope, as well as the largest convex mirror ever produced. Fabricating this highly convex, aspherical mirror is a considerable challenge — and the result will be a truly remarkable example of pioneering optical engineering. The secondary mirror and its support system — weighing 12 tonnes — will hang upside-down high above the 39-metre primary mirror.